Crossfire Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Check: A unit test framework for C ======
The Crossfire project specifies that developers shall create and run unit tests built with the check framework. The framework is often not packaged by *nix distributions, but it is not hard to install.

===== Installation =====

If the *nix distribution has the check framework packaged, use the distribution's customary method of adding packages, otherwise, install the tool as follows, or in a suitably similar manner:

  - Download the latest tarball from [[http://sourceforge.net/projects/check/files/|SourceForge]].  For example:<code>
  $ mkdir -p ~/devel/check
  $ cd ~/devel/check
  $ wget http://sourceforge.net/projects/check/files/check/0.9.9/check-0.9.9.tar.gz/download
  $ mv download check-0.9.9.tar.gz</code>
  - Unpack the tarball.<code>
  $ tar -xzf check-0.9.9.tar.gz</code>
  - Compile the framework.<code>
  $ cd check-*
  $ ./configure --prefix=/usr/local
  $ make</code>
  - Install the framework.<code>
  $ sudo make install</code>
  - As needed, modify the user environment to establish /usr/local/bin in the default run path.  In BASH, the following is viable:<code>
  if ! which checkmk; then \
    echo -e "\nexport PATH=\"\$\{PATH\}:/usr/local/bin\""; \
  fi >>~/.bash_profile
  . ~/.bash_profile</code>
  - As needed, modify the user environment to establish the location of the ''check'' resources.  In BASH, following is viable:<code>
  if pkg-config --uninstalled check; then \
    echo -e "\nexport PKG_CONFIG_PATH=\"\$\{PKG_CONFIG_PATH\}:/usr/local/lib/pkgconfig\""; \
    echo -e "export LD_LIBRARY_PATH=\"\$\{LD_LIBRARY_PATH\}:/usr/local/lib\"\n"; \
  fi >>~/.bash_profile
  . ~/.bash_profile</code>
  - As needed, and in lieu of defining a per-user ''LD_LIBRARY_PATH'', the following may be viable for certain operating environments:<code>
  if [ -d /etc/ld.so.conf.d ]; then \
    sudo echo "/usr/local/lib" >/etc/ld.so.conf.d/check.conf; \
    sudo ldconfig -v | grep check; \
  fi</code>

===== Verification =====

If the check framework is installed correctly, the server ''./configure'' or ''autogen.sh'' output should include:<code>
  configure:     Will process unit testing?           yes (will generate report)
  configure:       (run make; make -k check)
  configure:</code>
Crossfire Wiki

User Tools

Site Tools

Page Tools
