Crossfire Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======Development Environment Setup for Mageia 2======

This page presently references resources (like scripts) currently located on [[user:kbulgrien|KBulgrien's page]].

Note that this guide was created using an x86_64 operating system.  In general, simply remove "64" from the lib file names to convert it to a 32-bit operating system.

=====Trunk Client=====

  $ urpmq --fuzzy --whatprovides libglade2
  lib64glade2.0_0
  lib64glade2.0_0-devel

  $ sudo urpmi lib64glade2.0_0-devel
  In order to satisfy the 'devel(libcairo(64bit))' dependency, one of the following packages is needed:
   1- lib64cairo-devel-1.10.2-6.mga2.x86_64: Development files for Cairo library (to install)
   2- lib64cairo-xcb-devel-1.10.2-6.mga2.x86_64: Development files for Cairo library (to install)
  What is your choice? (1-2) 1
  To satisfy dependencies, the following packages are going to be installed:
    Package                        Version      Release       Arch
  (medium "Core Release")
    lib64atk1.0-devel              2.4.0        1.mga2        x86_64
    lib64cairo-devel               1.10.2       6.mga2        x86_64
    lib64directfb-devel            1.5.3        4.mga2        x86_64
    lib64ffi5-devel                3.0.10       1.mga2        x86_64
    lib64fontconfig-devel          2.8.0        6.mga2        x86_64
    lib64gdk_pixbuf2.0-devel       2.26.1       1.mga2        x86_64
    lib64glade2.0_0-devel          2.6.4        6.mga2        x86_64
    lib64gtk+2.0-devel             2.24.10      4.mga2        x86_64
    lib64lzma-devel                5.0.3        3.mga2        x86_64
    lib64pango1.0-devel            1.30.0       1.mga2        x86_64
    lib64pcre-devel                8.21         1.mga2        x86_64
    lib64png-devel                 1.5.10       1.mga2        x86_64
    lib64x11_6-devel               1.4.99.1     4.mga2        x86_64
    lib64xau6-devel                1.0.7        1.mga2        x86_64
    lib64xcb-composite0            1.8.1        1.mga2        x86_64
    lib64xcb-damage0               1.8.1        1.mga2        x86_64
    lib64xcb-devel                 1.8.1        1.mga2        x86_64
    lib64xcb-dpms0                 1.8.1        1.mga2        x86_64
    lib64xcb-randr0                1.8.1        1.mga2        x86_64
    lib64xcb-record0               1.8.1        1.mga2        x86_64
    lib64xcb-render0               1.8.1        1.mga2        x86_64
    lib64xcb-res0                  1.8.1        1.mga2        x86_64
    lib64xcb-screensaver0          1.8.1        1.mga2        x86_64
    lib64xcb-shape0                1.8.1        1.mga2        x86_64
    lib64xcb-shm0                  1.8.1        1.mga2        x86_64
    lib64xcb-sync0                 1.8.1        1.mga2        x86_64
    lib64xcb-xevie0                1.8.1        1.mga2        x86_64
    lib64xcb-xf86dri0              1.8.1        1.mga2        x86_64
    lib64xcb-xinerama0             1.8.1        1.mga2        x86_64
    lib64xcb-xprint0               1.8.1        1.mga2        x86_64
    lib64xcb-xtest0                1.8.1        1.mga2        x86_64
    lib64xcb-xv0                   1.8.1        1.mga2        x86_64
    lib64xcb-xvmc0                 1.8.1        1.mga2        x86_64
    lib64xcomposite1-devel         0.4.3        2.mga2        x86_64
    lib64xcursor-devel             1.1.13       1.mga2        x86_64
    lib64xdamage-devel             1.1.3        2.mga2        x86_64
    lib64xdmcp6-devel              1.1.1        1.mga2        x86_64
    lib64xext6-devel               1.3.1        1.mga2        x86_64
    lib64xfixes3-devel             5.0          2.mga2        x86_64
    lib64xft-devel                 2.3.0        1.mga2        x86_64
    lib64xi-devel                  1.4.5        1.mga2        x86_64
    lib64xinerama1-devel           1.1.2        1.mga2        x86_64
    lib64xrandr2-devel             1.3.2        2.mga2        x86_64
    lib64xrender1-devel            0.9.7        1.mga2        x86_64
    libpthread-stubs               0.3          1.mga1        x86_64
    pango-doc                      1.30.0       1.mga2        x86_64  (suggested)
    x11-proto-devel                7.6          17.mga2       x86_64
  (medium "Core Updates")
    glib-gettextize                2.32.4       1.1.mga2      x86_64
    lib64glib2.0-devel             2.32.4       1.1.mga2      x86_64
    lib64pixman-devel              0.24.4       1.1.mga2      x86_64
    lib64xml2-devel                2.7.8        14.20120229.> x86_64
    lib64zlib-devel                1.2.6        1.1.mga2      x86_64
  (medium "Tainted Updates")
    lib64freetype6-devel           2.4.9        1.1.mga2.tai> x86_64
  88MB of additional disk space will be used.
  10MB of packages will be retrieved.
  Proceed with the installation of the 53 packages? (Y/n) Y
  ...
  $ sudo urpmq --fuzzy curl-devel
  lib64curl-devel
  lib64flickcurl-devel
  ocaml-curl-devel
  $ sudo urpmi lib64curl-devel
  To satisfy dependencies, the following packages are going to be installed:
    Package                        Version      Release       Arch
  (medium "Core Release")
    lib64curl-devel                7.24.0       1.mga2        x86_64
    lib64ext2fs-devel              1.42.2       2.mga2        x86_64
    lib64idn-devel                 1.24         1.mga2        x86_64
    lib64sasl2-devel               2.1.23       19.mga2       x86_64
    lib64ssh2-devel                1.4.0        1.mga2        x86_64
    lib64wrap-devel                7.6          42.mga1       x86_64
  (medium "Core Updates")
    lib64krb53-devel               1.9.2        2.4.mga2      x86_64
    lib64ldap2.4_2-devel           2.4.29       2.1.mga2      x86_64
    lib64openssl-devel             1.0.0k       1.mga2        x86_64
  13MB of additional disk space will be used.
  3.1MB of packages will be retrieved.
  Proceed with the installation of the 9 packages? (Y/n) Y
  ...
  $ sudo urpmq --fuzzy lua-devel
  lib64lua-devel
  $ sudo urpmi lib64lua-devel
  To satisfy dependencies, the following packages are going to be installed:
    Package                        Version      Release       Arch
  (medium "Core Release")
    lib64readline-devel            6.2          4.mga2        x86_64
  (medium "Core Updates")
    lib64lua-devel                 5.1.4        10.1.mga2     x86_64
    lib64ncursesw-devel            5.9          6.1.mga2      x86_64
    lua                            5.1.4        10.1.mga2     x86_64
  13MB of additional disk space will be used.
  2.6MB of packages will be retrieved.
  Proceed with the installation of the 4 packages? (Y/n) Y
  ...
  $ sudo urpmq --fuzzy image-devel
  lib64SDL_image-devel
  lib64freeimage-devel
  lib64xcb-util-image-devel
  $ sudo urpmi lib64SDL_image-devel
  To satisfy dependencies, the following packages are going to be installed:
    Package                        Version      Release       Arch
  (medium "Core Release")
    lib64SDL-devel                 1.2.14       10.mga2       x86_64
    lib64SDL_image-devel           1.2.12       1.mga2        x86_64
    lib64aa-devel                  1.4.0        0.rc5.23.mga2 x86_64
    lib64alsa2-devel               1.0.25       3.mga2        x86_64
    lib64drm-devel                 2.4.33       1.mga2        x86_64
    lib64ggi-devel                 2.2.2        18.mga2       x86_64
    lib64gii-devel                 1.0.2        16.mga2       x86_64
    lib64gpm-devel                 1.20.6       7.mga2        x86_64
    lib64jbig-devel                2.0          5.mga1        x86_64
    lib64pciaccess-devel           0.13         1.mga2        x86_64
    lib64slang-devel               2.2.4        3.mga2        x86_64
    lib64xxf86dga-devel            1.1.3        1.mga2        x86_64
    lib64xxf86vm-devel             1.1.2        1.mga2        x86_64
  (medium "Core Updates")
    lib64jpeg-devel                1.2.0        4.1.mga2      x86_64
    lib64tiff-devel                4.0.1        2.5.mga2      x86_64
  (medium "Tainted Updates")
    lib64glapi0-devel              8.0.4        2.1.mga2.tai> x86_64
    lib64mesagl1-devel             8.0.4        2.1.mga2.tai> x86_64
    lib64mesaglu1-devel            8.0.4        2.1.mga2.tai> x86_64
  6.4MB of additional disk space will be used.
  1.6MB of packages will be retrieved.
  Proceed with the installation of the 18 packages? (Y/n) Y
  ...
  $ sudo urpmq --fuzzy glut
  lib64freeglut-devel
  lib64freeglut3
  lib64kwinglutils1
  $ sudo urpmi --fuzzy lib64freeglut-devel
  To satisfy dependencies, the following package is going to be installed:
    Package                        Version      Release       Arch
  (medium "Core Release")
    lib64freeglut-devel            2.8.0        2.mga2        x86_64
  120KB of additional disk space will be used.
  101KB of packages will be retrieved.
  Proceed with the installation of one package? (Y/n) Y
  ...
  $ sudo urpmi makedepend
  $ sudo urpmi cproto

Above instructions created a full client build environment.

  $ cd /home/devel/crossfire
  $ curl -l trunk.autogen.sh http://invidious.meflin.net/~kbulgrien/files/trunk.autogen.sh
  $ cd client/trunk
  $ bash ../../trunk.autogen.sh
  $ make
  $ sudo mkdir -p /home/apps/crossfire
  $ sudo chgrp -R ctools /home/apps
  $ sudo chmod -R g+rwx /home/apps
  $ make install
  $ /home/apps/crossfire/bin/crossfire-client-gtk2

=====client RPMs=====

TBD

=====.glade files=====

Client .glade window and dialog layout files are maintained using glade3:

  $ sudo urpmq --fuzzy glade
  glade
  glade-sharp2
  glade3
  lib64glade2.0_0
  lib64glade2.0_0-devel
  lib64glademm2.4-devel
  lib64glademm2.4_1
  lib64gladeui-gir2.0
  lib64gladeui1-devel
  lib64gladeui1_11
  lib64gladeui2-devel
  lib64gladeui2_0
  libglademm2.4-doc
  libxfce4ui-glade
  libxfcegui4-glade
  pygtk2.0-libglade
  squirrelmail-bn-bangladesh
  $ sudo urpmi glade3
  To satisfy dependencies, the following packages are going to be installed:
    Package                        Version      Release       Arch
  (medium "Core Release")
    devhelp                        3.4.1        1.mga2        x86_64
    glade3                         3.8.2        1.mga2        x86_64
    lib64devhelp3_0                3.4.1        1.mga2        x86_64
    lib64gladeui1_11               3.8.2        1.mga2        x86_64
  7.8MB of additional disk space will be used.
  1.8MB of packages will be retrieved.
  Proceed with the installation of the 4 packages? (Y/n) Y

=====Trunk Server=====

After installing the client packages, this still needed to be done:

  $ sudo urpmi flex
  installing flex-2.5.35-7.mga1.x86_64.rpm ...
  $ sudo uprmi python-devel
  installing lib64python-devel-2.7.3-2.3.mga2.x86_64.rpm ...

=====Mapper (Server)=====

Presuming the client and server dependencies are loaded, this was needed:

  $ sudo urpmq --fuzzy gd-devel
  lib64gd-devel
  lib64gupnp-igd-devel
  $ sudo urpmi lib64gd-devel
  To satisfy dependencies, the following packages are going to be installed:
    Package                        Version      Release       Arch
  (medium "Core Release")
    lib64gd-devel                  2.0.35       18.mga2       x86_64
    lib64xpm-devel                 3.5.10       1.mga2        x86_64
  359KB of additional disk space will be used.
  97KB of packages will be retrieved.
  Proceed with the installation of the 2 packages? (Y/n) Y

=====CRE (Server)=====

CRE needs qmake:

  $ sudo urpmq --fuzzy qt4-devel
  ibus-qt4-devel
  lib64avahi-qt4-devel
  lib64libntrack-qt4-devel
  lib64poppler-qt4-devel
  lib64qt4-devel
  perl-qt4-devel
  python-qt4-devel
  qt4-devel-private
  ruby-qt4-devel
  $ sudo urpmi lib64qt4-devel
  To satisfy dependencies, the following packages are going to be installed:
    Package                        Version      Release       Arch
  (medium "Core Release")
    lib64asyncns-devel             0.8          3.mga1        x86_64
    lib64cap-devel                 2.22         2.mga2        x86_64
    lib64flac-devel                1.2.1        10.mga2       x86_64
    lib64ice-devel                 1.0.8        1.mga2        x86_64
    lib64json-devel                0.9          1.mga1        x86_64
    lib64ogg-devel                 1.3.0        1.mga2        x86_64
    lib64phononexperimental4       4.6.0        1.mga2        x86_64
    lib64pulseaudio-devel          2.0          1.mga2        x86_64
    lib64sm-devel                  1.2.1        1.mga2        x86_64
    lib64sndfile-devel             1.0.25       1.mga2        x86_64
    lib64vorbis-devel              1.3.3        1.mga2        x86_64
    lib64xtst6-devel               1.2.1        1.mga2        x86_64
    phonon-devel                   4.6.0        1.mga2        x86_64
  (medium "Core Updates")
    lib64dbus-1-devel              1.4.16       5.1.mga2      x86_64
    lib64qt4-devel                 4.8.4        1.1.mga2      x86_64
    lib64qtclucene4                4.8.4        1.1.mga2      x86_64
    lib64qthelp4                   4.8.4        1.1.mga2      x86_64
    lib64qtscripttools4            4.8.4        1.1.mga2      x86_64
    qt4-designer-plugin-qt3support 4.8.4        1.1.mga2      x86_64
    qt4-designer-plugin-webkit     4.8.4        1.1.mga2      x86_64
    qt4-qtconfig                   4.8.4        1.1.mga2      x86_64
  55MB of additional disk space will be used.
  8.5MB of packages will be retrieved.
  Proceed with the installation of the 21 packages? (Y/n) Y

The setup defaults to not building the random house generator plugin.  Add ''--enable-cfrhg'' when running ''./configure'' (or the ''autogen.sh'' script) to assure it is built.

The above instructions do not explain how to set up the unit test environment.  See the [[dev:check|check unit test framework]] page for an install procedure.

  configure:
  configure: Configuration summary....
  configure:
  configure:   Paths
  configure:     prefix default value                 /home/apps/crossfire
  configure:     exec_prefix default value            ${prefix}
  configure:     Will put executables in              ${exec_prefix}/bin
  configure:     Will put resources in                ${datarootdir}
  configure:     Will put config in                   ${prefix}/etc
  configure:     Will put server runtime datas in:    ${prefix}/var
  configure:
  configure:   Build options
  configure:
  configure:     Will build metaserver2 support?      yes
  configure:     Will build plugins?                  yes
  configure:     Will build python plugin?            yes
  configure:     Will build random house plugin?      no
  configure:     Will process unit testing?           no
  configure:       If you are a developer, you MUST install the check framework
  configure:       and write automated tests for all your add-ons!
  configure:
  configure:   Build utilities (Not required to build or run the server)
  configure:
  configure:     Will build crossfire-mapper?         yes
  configure:
Crossfire Wiki

User Tools

Site Tools

Page Tools
