Crossfire Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Crossfire Client configuration file gdefaults ======

The //gdefaults// file is usually located inside the **.**[[crossfire]] directory. \\
This file applies to the old **gtk-1** client for crossfire, \\
The newer gtk-2 client uses the [[gdefaults2]] file as configuration file. \\

This configuration file does not exist in a fresh installation of the client. \\
This file gets created by pressing the 'Save' button in the client configuration sub window \\
found in the Menubar > Client > Configure .

At the top of the file one reads :
<code conf>
# This file is generated automatically by gcfclient.
# Manually editing is allowed, however gcfclient may be a bit finicky about
# some of the matching it does.  all comparisons are case sensitive.
# 'True' and 'False' are the proper cases for those two values
# 'True' and 'False' have been replaced with 1 and 0 respectively
</code>
The code in function //load_defaults()// in file //client/gtk/config.c// parses as follows :
<code c>
        if (inbuf[0]=='#') continue;
    /* IF no colon, then we certainly don't have a real value, so just skip */
    if (!(cp=strchr(inbuf,':'))) continue;
    *cp='\0';
    cp+=2;      /* colon, space, then value */

    val = -1;
    if (isdigit(*cp)) val=atoi(cp);
    else if (!strcmp(cp,"True")) val = TRUE;
    else if (!strcmp(cp,"False")) val = FALSE;
</code>
Meaning, that lines starting with **#** are ignored, \\
lines need to contain a colon **:** or are ignored, \\
and may have any content, but digits *not* **-1** , \\
and still recognizes **True** or **False** in case sensitive string comparison.

----

===== Entries =====
Sorted by alphabetical sort:
  - [[#auto_apply_container]]: < 0 | 1 >
  - [[#cacheimages]]: < 0 | 1 >
  - [[#command_window]]: < 1 - 127 >
  - [[#darkness]]: < 0 | 1 >
  - [[#displaymode]]: < 0 | 1 > [ CFG_DM_PIXMAP , CFG_DM_SDL ]
  - [[#download_all_images]]: < 0 | 1 >
  - [[#echo_bindings]]: < 0 | 1 >
  - [[#faceset]]: < standard | classic >
  - [[#fasttcpsend]]: < 0 | 1 >
  - [[#fog_of_war]]: < 0 | 1 >
  - [[#foodbeep]]: < 0 | 1 >
  - [[#grad_color_bars]]: < 0 | 1 >
  - [[#iconscale]]: < 25 - 200 >
  - [[#lighting]]: < 0 - 3 > [ CFG_LT_NONE , CFG_LT_TILE , CFG_LT_PIXEL , CFG_LT_PIXEL_BEST ]
  - [[#map_height]]: < 9 - 31 > [ MAP_MAX_SIZE ]
  - [[#map_width]]: < 9 - 31 > [ MAP_MAX_SIZE ]
  - [[#mapscale]]: < 25 - 200 >
  - [[#mapscroll]]: < 0 | 1 >
  - [[#message_timestamping]]: < 0 | 1 >
  - [[#nosplash]]: < 0 | 1 >
  - [[#popups]]: < 0 | 1 >
  - [[#port]]:  13327 [ EPORT , DEFPORT ]
  - [[#resistances]]: < 0 | 1 >
  - [[#server]]: (null)
  - [[#show_grid]]: < 0 | 1 >
  - [[#showicon]]: < 0 | 1 >
  - [[#sign_popups]]: < 0 | 1 >
  - [[#smoothing]]: < 0 | 1 >
  - [[#sound]]: < 0 | 1 >
  - [[#sound_server]]: < cfsndserv | cfsndserv_alsa9 >
  - [[#split]]: < 0 | 1 >
  - [[#splitinfo]]: < 0 | 1 >
  - [[#tooltips]]: < 0 | 1 >
  - [[#trim_info_window]]: < 0 | 1 >

----

==== auto_apply_container ====
Range: 0 - 1 | False | True \\
Default: 1 \\
Menu Entry: Client > Configure > General "Automatically re-applies a container when you use apply to close it. \nIf off, when you use apply to close the container, it stays unapplied"

==== cacheimages ====
Range: 0 - 1 | False | True \\
Default: 0 \\
Menu Entry: Client > Configure > Map & Image "Cache Images"

==== command_window ====
Range: \\
Default: 10 \\
Menu Entry: Client > Configure > General "Command Window"

==== darkness ====
Range: 0 - 1 | False | True \\
Default: 1 \\
Menu Entry: Client > Configure > Map & Image "Enable darkness code - if off, all spaces will not be dimmed."

See also [[#lighting]]

==== displaymode ====
Range: 0 - 1 | False | True \\
Default: 0 \\
Menu Entry: Client > Configure > Map & Image "SDL Image Support (Take effect next run)"

The displaymode entry can have two values for drawing the map:
  * 0 : Pixmap
  * 1 : SDL ; command line option [[optional parameters#-sdl]]
Any other numerical values than those above will still be "acknowledged" by the client, but will lead to error messages  as \\
''[ ERROR  ] (Library::Gdk-CRITICAL) file gdkdraw.c: line 89 (gdk_draw_rectangle): assertion `drawable != NULL' failed.'' \\
and \\
''[ ERROR  ] (Library::Gdk-CRITICAL) file gdkdraw.c: line 379 (gdk_draw_pixmap): assertion `drawable != NULL' failed.'' \\
and \\
''[ ERROR  ] (Library::Gdk-CRITICAL) file gdkdraw.c: line 380 (gdk_draw_pixmap): assertion `src != NULL' failed.'' \\
, thus the map would not be drawn.

=== SDL ===
If the SDL libraries were not available at [[client compiling]] time, then the displaymode would fall back to Pixmap mode. \\
The client then does not print anything to stderr from function //load_defaults()// in //client/gtk/config.c// \\
to inform the user about it:
<code c>
#ifndef HAVE_SDL
    /* If SDL is not built in, having SDL mode turned on causes many issues. */
    want_config[CONFIG_DISPLAYMODE] = CFG_DM_PIXMAP;
#endif
</code>

See also [[#lighting]] modes for SDL.

==== download_all_images ====
Range: 0 - 1 | False | True \\
Default: 0 \\
Menu Entry: Client > Configure > Map & Image "Download All Image Information (Takes effect on next server connection)"

==== echo_bindings ====
Range: 0 - 1 | False | True \\
Default: 0 \\
Menu Entry: Client > Configure > General "Echo Bound Commands"

When set, should print the commands issued to the server by keypress in the informational window.

See also [[:player_commands]] .

==== faceset ====
Range: \\
Default: standard \\
Menu Entry: Client > Configure > Map & Image

==== fasttcpsend ====
Range: 0 - 1 | False | True \\
Default: 1 \\
Menu Entry: Client > Configure > General "Fast TCP Send (May improve performance at expense\n of outgoing bandwidth)"

==== fog_of_war ====
Range: 0 - 1 | False | True \\
Default: 1 \\
Menu Entry: Client > Configure > Map & Image "Fog of War"

The "Fog of War" is mere a "Line of Sight" handler, since cleared areas do not become covered by inscrutable "mist" again, \\
except for [[#darkness]] may gray out cleared areas again.

==== foodbeep ====
Range: 0 - 1 | False | True \\
Default: 0 \\
Menu Entry: Client > Configure > General "Beep When Food is Low"

The client issues beep tones to the beep speaker of the computer, when the nourishing level gets below 200,
and each time the nourishing level is decremented by 1.

==== grad_color_bars ====
Range: 0 - 1 | False | True \\
Default: 0 \\
Menu Entry: Client > Configure > General "Gradually change stat bar color based on value of the stat.\nThis option will result in some extra CPU usage."

When unset, the status bars for HP, SP, GR, Food do not change coloration according to their current amount.

==== iconscale ====
Range: \\
Default: 100 \\
Menu Entry: Client > Configure > Map & Image  "Icon Scale (Takes effect next run)"

==== lighting ====
Range: \\
Default: 1  \\
Menu Entry: Client > Configure > Map & Image "Lighting options, per pixel is prettier, per tile is faster.\nIf the darkness code is off, the pixel/tile options will be ignored."
  * "Best Per Pixel Lighting (slowest)"
  * "Fast Per Pixel Lighting"
  * "Per Tile Lighting"

SDL lighting in pictures: City of Navar around midnight .. \\

^ lighting 0 None ^ lighting 1 Per Tile ^ lighting 2 Fast per Pixel ^ lighting 3 Best per Pixel ^
| {{sdl_lightning_0_none.jpg?180}} | {{sdl_lightning_1_per_tile.jpg?180}} | {{sdl_lightning_2_fast_per_pixel.jpg?180}} | {{sdl_lightning_3_best_per_pixel.jpg?180}} |

==== map_height ====
Range: \\
Default: 11 \\
Menu Entry: Client > Configure > General "Map Height"

"Map Size: Larger map lets you see more information, but takes more CPU\npower and bandwidth.  Changing these will not take effect until the next time\nyou connect to a server"

==== map_width ====
Range: \\
Default: 11 \\
Menu Entry: Client > Configure > General "Map Width"

==== mapscale ====
Range: \\
Default: 100 \\
Menu Entry: Client > Configure > Map & Image "Map Scale (Takes effect next run)"

==== mapscroll ====
Range: \\
Default: 1 \\
Menu Entry: //not available//

==== message_timestamping ====
Range: 0 - 1 | False | True \\
Default: 0 \\
Menu Entry: Client > Configure > General "Timestamp Messages"

when set, adds a HH:MM Hour:Minute tag to each message printed in the informational window.

==== nosplash ====
Range: 0 - 1 | False | True \\
Default: 1 \\
Menu Entry: Client > Configure > General "Splash Window"

==== popups ====
Values : 0 or 1 -- 0 disables popup windows like a separate log-in window, 1 enables them. \\
Default: 0 ( disabled ) \\
Menu Entry: Client > Configure > General "Popup Windows"

The default is set to **0** inside the source code \\
in function init_client_vars() in file common/init.c as variable want_config[CONFIG_POPUPS] = FALSE; .

Command-line options : [[optional_parameters#-popups]] and [[optional_parameters#-nopopups]]

Behaviour: Most popup-windows might be annoying, while playing the game, but the log-on to a server had been impossible for versions 1.11.0 and below of the GTK-1 client, if that was unset ( 0 ) . To enter a user-name was not possible in the "traditional" Info-Message and Cmd-Line Pane on the right side of the client. \\
See also
  * ChangeLog [[changelog_0_92_1_70_0#Popups not the default anymore]]
  * ChangeLog [[changelog_0_92_1_70_0#Popups @ v.1.12.0 client GTK1 mixed with GTK2 can not login]]
  * ChangeLog [[changelog_0_92_1_70_0#Keyboard input impossible or confusing]]
  * known_client_issues [[:known_client_issues#Keyboard input impossible or confusing]]
  * bugs [[bugs#Pressing a keyboard key activates the command-line]]


==== port ====
Range: \\
Default: \\
Menu Entry: //not available//

==== resistances ====
Range: 0 - 1 | False | True \\
Default: 0 \\
Menu Entry: Client > Configure > General "Display resistances in two columns rather than only one."

The value **0** prints resistances in 1 column, the value **1** prints them in two columns.

==== server ====
Range: \\
Default: \\
Menu Entry: //not available//

==== show_grid ====
Range: 0 - 1 | False | True \\
Default: 0

This option is only available for the SDL [[#displaymode]] . \\
Purpose: It draws a red tile grid-overlay onto the map. \\
Effect: But this grid vanishes as soon as the player moves. \\
Implemented: gridline options available under the client config window. //MSW 2001-06-17// \\
Client Menu: Client > Configure > Map & Image > "Print Grid Overlay (SDL only, Slow, useful for debugging/development"

The GTK-2 client does not have such a Menu option to choose anymore; but still has this parameter entry in it's [[gdefaults2]] config file.

==== showicon ====
Range: 0 - 1 | False | True \\
Default: 0 \\
Menu Entry: Client > Configure > General "Show Inventory Icon"

Add a notebook tab to the inventory window, where the items in the inventory are just drawn without any text.

==== sign_popups ====
Range: 0 - 1 | False | True \\
Default: 1 \\
Menu Entry: Client > Configure > General "Popup Sign Windows (need [[#popups|Popup]] Windows checked to be used)"

==== smoothing ====
Range: 0 - 1 | False | True \\
Default: 0   \\
Menu Entry: Client > Configure > Map & Image "Enable smoothing - Use additionnal CPU (Take effect on next connection)."

==== sound ====
Range: 0 - 1 | False | True \\
Default: 1 \\
Menu Entry: Client > Configure > General "Sound"

When enabled, raises a sound server, but sound had been broken for a long time. \\
The server has to send sound effect commands to the client.

==== sound_server ====
Range: \\
Default: cfsndserv \\
Menu Entry: //not available//

==== split ====
Range: 0 - 1 | False | True \\
Default: 0 \\
Menu Entry: Client > Configure > General "Split Windows"

When set, the client GUI will be split into several small windows, instead of one single window.

==== splitinfo ====
Range: 0 - 1 | False | True \\
Default: 0 \\
Menu Entry: Client > Configure > General "Split Information Window (Takes effect next run)"

The information window to the right side of the GUI can be split into two areas. \\
The upper area the usually draws coloured messages, while the lower part draws the common black messages.

==== tooltips ====
Range: 0 - 1 | False | True \\
Default: 1 \\
Menu Entry: Client > Configure > General  "Show Tooltips"

Tooltips are the small text popups that appear when hoovering with the mouse pointer about areas.

==== trim_info_window ====
Range: 0 - 1 | False | True \\
Default: 0 \\
Menu Entry: Client > Configure > General "Trims text in the information window - " \\
 "improves performance but bugs in\n gtk make the client unstable if this is used." \\
 "This may work better with gtk 2.0" \\

When set, limits the scrollback buffer of the information window to ~100 thousand chars.
Crossfire Wiki

User Tools

Site Tools

Page Tools
