Crossfire Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== CRE (Crossfire Resource Editor) ======


To build CRE, you first need to [[:server:server_compiling|build the server]] and install it (''make install'' if running under Linux).

CRE sources are part of the server sources.

===== Requirements =====

You need Qt5 and the associated development package.

Depending on your system, installing ''qt5-default'' may be enough.

===== Distribution Specific Requirements =====

==== Arch Linux ====
FIXME - Placeholder text

==== Debian ====

==== Debian 10 (Buster) ====

A quick reference for Debian 10 (Buster)

  sudo apt install qttools5-dev qttools5-dev-tools qtscript5-dev
  
Instructions creation date: 2024-February-29

Last tested date: 2024-February-29
==== Debian 11 (Bullseye) ====

A quick reference for Debian 11 (Bullseye)

  sudo apt install qttools5-dev qttools5-dev-tools qtscript5-dev
  
Instructions creation date: 2024-February-29

Last tested date: 2024-February-29

==== Debian 12 (Bookworm) ====

A quick reference for Debian 12 (Bookworm)

  sudo apt install qttools5-dev qttools5-dev-tools qtscript5-dev
  
Instructions creation date: 2024-February-29

Last tested date: 2024-February-29

==== Devuan ====

==== Devuan Chimaera 4.0 ====

A quick reference for Devuan Chimaera 4.0

  sudo apt install qttools5-dev qttools5-dev-tools qtscript5-dev
  
Instructions creation date: 2024-February-29

Last tested date: 2024-February-29

==== Devuan Daedalus 5.0 ====

A quick reference for Daedalus 5.0

  sudo apt install qttools5-dev qttools5-dev-tools qtscript5-dev
  
Instructions creation date: 2024-March-01

Last tested date: 2024-March-01


==== Fedora ====

==== Fedora 37 ====

A quick reference for Fedora 37

  sudo dnf install qt5-qtbase-devel qt5-qttools-devel
  
Instructions creation date: 2024-March-02

Last tested date: 2024-March-02

==== Fedora 38 ====

A quick reference for Fedora 38

  sudo dnf install qt5-qtbase-devel qt5-qtscript-devel qt5-qttools-devel
  
Instructions creation date: 2024-March-02

Last tested date: 2024-March-02

==== Fedora 39 ====

A quick reference for Fedora 39

  sudo dnf install qt5-qtbase-devel qt5-qtscript-devel qt5-qttools-devel
  
Instructions creation date: 2024-March-02

Last tested date: 2024-March-02

==== Linux Mint ====

==== Linux Mint 20 (Ulyana) ====

A quick reference for Linux Mint 20 (Ulyana)

  sudo apt install qttools5-dev qttools5-dev-tools qtscript5-dev
  
Instructions creation date: 2024-March-03

Last tested date: 2024-March-03

==== Linux Mint 20.1 (Ulyssa) ====


A quick reference for Linux Mint 20.1 (Ulyssa)

  sudo apt install qttools5-dev qttools5-dev-tools qtscript5-dev
  
Instructions creation date: 2024-March-06

Last tested date: 2024-March-06


==== Linux Mint 20.2 (Uma) ====

A quick reference for Linux Mint 20.2 (Uma)

  sudo apt install qttools5-dev qttools5-dev-tools qtscript5-dev
  
Instructions creation date: 2024-March-06

Last tested date: 2024-March-06

==== Mint 20.3 (Una) ====

A quick reference for Linux Mint 20.3 (Una)

  sudo apt install qttools5-dev qttools5-dev-tools qtscript5-dev
  
Instructions creation date: 2024-March-06

Last tested date: 2024-March-06

==== Linux Mint 21 (Vanessa) ====

A quick reference for Linux Mint 21 (Vanessa)

  sudo apt install qt5-qmake qt5-qmake-bin qttools5-dev qttools5-dev-tools qtbase5-dev qtscript5-dev
  
Instructions creation date: 2024-March-06

Last tested date: 2024-March-06

==== Linux Mint 21.1 (Vera) ====

A quick reference for Linux Mint 21.1 (Vera)

  sudo apt install qt5-qmake qt5-qmake-bin qttools5-dev qttools5-dev-tools qtbase5-dev qtscript5-dev
  
Instructions creation date: 2024-March-06

Last tested date: 2024-March-06

==== Linux Mint 21.2 (Victoria) ====
FIXME - Placeholder text

==== Linux Mint Debian Edition ====
FIXME - Placeholder text

==== Manjaro ====

==== Manjaro 23.1.3 (Vulcan) ====
FIXME - Placeholder text

==== OpenSUSE ====

==== OpenSUSE Leap 15.5 ====
FIXME - Placeholder text

==== OpenSUSE Tumbleweed ====
FIXME - Placeholder text

==== Pop!_OS ====

==== Pop!_OS 22.04 LTS ====
FIXME - Placeholder text

==== Pop!_OS 22.04 LTS (NVIDIA) ====
FIXME - Placeholder text

==== Ubuntu ====

==== Ubuntu 18.04 LTS (Bionic Beaver) ====

  sudo apt install qt5-qmake qt5-qmake-bin qt5-default qtcreator

==== Ubuntu 20.04 LTS (Focal Fossa) ====
FIXME - Placeholder text

==== Ubuntu 22.04 LTS (Jammy Jellyfish) ====

  sudo apt install qt5-qmake qt5-qmake-bin qttools5-dev qttools5-dev-tools qtbase5-dev

==== Ubuntu 23.10 (Mantic Minotaur) ====


A quick reference for Ubuntu 23.10 (Mantic Minotaur)

  sudo apt install qttools5-dev qttools5-dev-tools qtscript5-dev
  
Instructions creation date: 2024-February-29

Last tested date: 2024-February-29


====== Building ======

===== Linux =====

Once the server has been built and installed (with ''./configure && make install''), from the server sources root:

''cd utils/cre && qmake && make''

Make sure to use qmake from Qt version 5, and not a previous version. On Fedora for instance, you need to run ''qmake-qt5''

''cd utils/cre && qmake-qt5 && make''

or 

''cd utils/cre qt5-qmake && make''

This should build the tool, to run it:

''utils/cre/cre''

should do the trick.

===== Windows =====

Windows users wishing to use CRE have two options if they don't wish to compile CRE themselves: use the installer, or use the standalone executable. They are available from [[http://crossfire.weeger.org]]. Both are updated daily, with some ''archives''.

In both cases, it is required to get ''maps'' and ''arch'' (read below).

Both CRE versions are cross-compiled, so there may be unknown issues. Please report any issues, or problems with this documentation. 
==== Using the installer (recommended) ====

The latest version of the installer is available from [[http://crossfire.weeger.org/CREInstaller-latest.exe|this direct link]] (make sure to check the [[http://crossfire.weeger.org/CREInstaller-latest.exe.sha512|sha512 sum]]).

It will create required directories and add start menu and desktop shortcuts if wanted.

Note that if you run the installer when a version is already installed, the old version is uninstalled silently.

==== Using the standalone executable ====

CRE standalone is available from [[http://crossfire.weeger.org/cre-latest.exe|this direct link]] (make sure to check the [[http://crossfire.weeger.org/cre-latest.exe.sha512|sha512 sum]]).

FIXME - are the manual setup steps listed below still required with the current .exe installer?

After putting the ''.exe'' in the directory of your choice, you need to assemble a few prerequisites before it will run: 

FIXME - Discord/IRC discussion indicates, "CRE expects cre's dir/var/{arch,maps}" - is this still correct?

First, create a directory alongside the .exe, named ''share''. Get the ''i18n'' directory from the server source (it's in ''[[https://sourceforge.net/p/crossfire/crossfire-server/ci/master/tree/lib/i18n/|lib\i18n]]'') and place it here too.

Next, create a directory alongside the .exe, named ''etc''. Find ''exp_table'', ''settings'', and ''stat_bonus'' from the server source (they're in ''[[https://sourceforge.net/p/crossfire/crossfire-server/ci/master/tree/lib/config/|lib\config]]''), and place them here in ''etc''. Note that if you are running a Crossfire server, maybe you want to pull these files from your server config instead.

Finally, create a directory alongside the .exe, named ''var''. CRE may place temporary files here at runtime.

==== Finishing steps ====

Get ''arch'' and ''maps'', and put them into ''share''.

One way is to get a snapshot from Sourceforge, available [[https://sourceforge.net/p/crossfire/crossfire-maps/ci/master/tarball?path=|for maps]] and [[https://sourceforge.net/p/crossfire/crossfire-arch/ci/master/tarball?path=|for arch]].

Another option is to clone the git repositories so you can easily push your changes upstream. 

==== Troubleshooting ====
Note that it can take quite a few seconds for CRE to launch, even longer if your disk is slow, as it loads many files on launch.

If CRE launches and then exits, it may be having trouble finding some paths. There should be a log file in ''%temp%\cre.log'' giving some details.

Procmon from the Sysinternals Suite may be helpful, or a debugger.
====== Interface ======

FIXME - provide summary with each tool bar option

At first start, CRE will ask you to choose a ''cache'' directory. This directory will contain data kept between runs, to speed up start. Don't use a temporary directory that is erased now and then, but you don't need a fully backup-ed one either, since the data may be rebuilt.

When launched, CRE will start browsing maps. As long as a message is displayed in the right side of the status bar, then the process is not complete. You can use almost all features, but some information may be incomplete (for instance, archetype use will not report on maps which are not yet browsed).

Once CRE is launched, you have the following menu options:

  * Open
    * Resources - searchable interface for archetypes, animations, treasures forumale, artifacts, faces, maps, quests, NPC dialogs, scripts, random maps, messages
    * Artifacts - searchable interface for potions, food, drink, skill tool, bow, arrow, container, amulet, gem, boots, cloak, rod ring, armour, glove, shield, helmet, weapon,none
    * Archetypes - a searchable listing of the archetypes
    * Treasures - a searchable listing of all monsters (in alphabetical order) and the treasure that is found when they are slain
    * Animations - shows all the in-game items that have an animation, the individual graphics or frames to make the animation, and a preview of the item animation
    * Formulae - lists all the items that can be crafted with the various in-game skills (smithery, woodsman, alchemy, et al.) based on the number of ingredient requirements
    * Faces - a long list of all graphics (or faces) used in the game
    * Maps - this is a list of all available maps sorted by region; each heading then lists individual maps that show the total experience that can be gained from the map, it's listed difficulty and it's calculated difficulty based on monster population and other factors, also included is map exits from and to the selected map
    * Quests - incomplete (or in development) list of quests with a summary and requirement steps
    * NPC dialogs - interface for all the .msg dialog files used by NPC characters, also include conditions met or key word requirements for the dialog
    * Experience - shows a listing of experience need to progress or gain levels, one column shows the grand total of needed experience (i.e., 4000 for level 3, 8000 for level 4) and the second column shows the experience needed to gain one level (i.e., 61000 experience needed to go from level 7 to level 8)
    * Scripts - shows all the python scripts used to manage places such as guilds, certain cult altars, post office, message boards, casino, etc.
    * Random Maps - lists all the randomly generated maps and where they are located, plus if the random map ends in a static map, and lists the depth (or number of levels) that the map contains; when a map is selected it shows its dimensions such as wallstyle, floorstyle, monsterstyle, decorestyle, exitstyle, difficulty_increase rate, dungeon level (difficulty), and dungeon depth
    * Messages - various message found in books and random readings (from the ''messages'' file in arch)
  * Save
    * Formulae
    * Quests
    * Dialogs
  * Reports
    * Faces and animations report
    * Spell damage
    * Alchemy
    * Alchemy graph
    * Spells
    * Players vs monsters
    * Summoned pets statistics
    * Shop specializations
    * Quest solved by players
    * Materials
    * Unused archetypes
  * Tools
    * Edit monsters
    * Generate smooth face base
    * Generate HP bar
    * Combat simulator
    * Generate face variants
    * Clear map cache
Crossfire Wiki

User Tools

Site Tools

Page Tools
