Crossfire Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Config.h ======

The file //config.h// is to be found in the //include// directory of the server source. \\

It contains many variables, that can be manually adjusted.


**Note:** The file //autoconf.h// contains all the variable defines, that were found or passed to the ./configure script.


===== TMPDIR ==

When configuring the server with a --prefix=/path variable, the TMPDIR still uses the definitions of the config.h file.

This is a bit unfortunate, because it prevents to run the server on multiple instances, \\
since the temporary map names would all be shared in the fixed location at **/tmp** for Linux.

If it is planned to add a --prefix to configure, then before running ''make'' it is probably useful \\
to adjust the TMPDIR variable to match --prefix .

Example: ./configure --prefix=/usr/games/crossfire-1.70.0 \\
should then make TMPDIR look as
''#define TMPDIR "/usr/games/crossfire-1.70.0/tmp"''

After ''make && make install'' then this TMPDIR needs to be manually created with the proper permissions.
<code bash>
mkdir  /usr/games/crossfire-1.70.0/tmp
</code>
FIXME Proper permissions for TMPDIR


===== LOGFILE ==

As it is with the variable [[#TMPDIR]] , the LOGFILE variable is fixed set in config.h .

Despite the fact, that LOCALDIR would use the --prefix parameter in {prefix}/var , \\
the LOGFILE variable does not use {prefix} :-( .

On Linux the LOGFILE variable is by default set to ''#define LOGFILE "/var/log/crossfire/logfile"'' ; \\
Which then may need to create the // /var/log/crossfire// directory manually ( with proper permissions ) .

If it is planned to add a --prefix to configure, then before running ''make'' it is probably useful \\
to adjust the LOGFILE variable to match --prefix .

Example: ./configure --prefix=/usr/games/crossfire-1.70.0 \\
should then make LOGFILE look as
''#define LOGFILE "/usr/games/crossfire-1.70.0/var/log/crossfire-server-1.70.0.log"''

FIXME Proper permissions for LOGFILE


===== mapsize ==
The server has two pre-defined maximum mapsize values to send to the client : **MAP_CLIENT_X** and **MAP_CLIENT_Y** . \\
It is unfortunately not possible to set those in the //etc/crossfire/settings// file.
<code c>
#define MAP_CLIENT_X    25
#define MAP_CLIENT_Y    25
</code>

Since the client supports a maximum of 31, it might be advised to set these two values to 31 also, \\
especially for local servers just consuming loop back (inerface lo) bandwidth.

===== NEW_MATERIAL_CODE ==
When this variable is enabled, the material of an item is displayed in the user's inventory and look window:
<code c>
 #define NEW_MATERIAL_CODE 1
</code>

Example :
>- 8 eight **bronze** throwing daggers (1213621)  13.2 kg
>- 1 **iron** long sword of Lythander (wielded) (1469332)  14.5 kg
>- 4 four **oak** clubs (1213628)    39.6 kg
>- 2 two **copper** axes (1213626)   13.2 kg
>- 1 **granite** stoneaxe (1213627)   8.5 kg
>- 1 **pine** bow * (1469324)        12.0 kg
>- 1 **iron** hauberk (worn) (1469337)  50.0 kg
>- 1 **cotton** robe * (1469308)     10.0 kg
>- 1 **leather** jack boots * (worn) (1469351)   6.5 kg
>- 1 **leather** pair of shoes * (1469367)   2.0 kg
>- 1 **iron** thief's gauntlets +2 (worn) (1469350)   1.8 kg
>- 2 two **organic** sharp bones +2 (1469296)   2.0 kg
Crossfire Wiki

User Tools

Site Tools

Page Tools
