Crossfire Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Git ======

Git is a revision control system, just like rcs, cvs and [[svn|subversion (SVN)]] are. \\
Though the Crossfire repository is maintained by svn, it is possible to access this svn repo with git. \\
The subversion package needs to be installed though, since it has bindings for PERL because git-svn is a perl script located in {prefix}/libexec/git-core .

===== Prerequisites ==

The bindings of SVN for Perl are available if SWIG is installed. \\
SVN needs to know where to find the swig binary at compilation time :
<code bash>
./configure --with-swig=/usr/rcs/bin/swig --with-ssl=/usr --with-apr=/usr/rcs --with-apr-util=/usr/rcs --with-neon=/usr/rcs --prefix=/usr/rcs/svn-1.6.23 --with-zlib=/lib --with-serf=/usr/rcs 
</code>
When SWIG is available, then after ''make'' it needs additionally ''make swig-pl'' to compile the SVN perl modules and libraries. \\
''make && make swig-pl && make install && make install-swig-pl'' should then install the PERL bindings to something like \\
// /usr/lib/perl5/site_perl/5.10.1/i686-linux-thread-multi-ld/SVN// directory. \\

''export PERLLIB='/usr/lib/perl5' '' and ''export PERL5LIB='/usr/lib/perl5' '' might be required though, so the perl modules are found.


===== git svn clone -r 1 ==

Inside a new created directory then run these commands :
<code bash>
git svn clone -r 1 svn://svn.code.sf.net/p/crossfire/code ;echo $?
</code>
Which should print to the terminal
>Initialized empty Git repository in /mnt/sdb16/CROSSFIRE/svn/git_experiments/code/.git/
>W: +empty_dir: trunk
>r1 = a967a85ee09bcf27915ff5eb652a10a7dc0d4a89 (refs/remotes/git-svn)
>Checked out HEAD:
>  svn:%%//%%svn.code.sf.net/p/crossfire/code r1
>creating empty directory: trunk
>0
And create a directory "code" with a hidden .git/ folder and a trunk/ folder structure.

Inside the **.git** folder there is a file named **config** which should look like
<code conf>
[core]
	repositoryformatversion = 0
	filemode = true
	bare = false
	logallrefupdates = true
[svn-remote "svn"]
	url = svn://svn.code.sf.net/p/crossfire/code
	fetch = :refs/remotes/git-svn
</code>

Now it needs to change into the new 'code' directory :
<code bash>
cd code
</code>

Then run git svn log and git log:
<code bash>
 git svn log                   
------------------------------------------------------------------------
r1 | (no author) | 1999-03-29 03:46:48 -0100 (Mon, 29 Mar 1999) | 2 lines

New repository initialized by cvs2svn.

------------------------------------------------------------------------

 git log
commit c03bc89287c20c60c8d52377771046f54166d4eb (HEAD -> master)
Author: (no author) <(no author)@282e977c-c81d-0410-88c4-b93c2d0d6712>
Date:   Mon Mar 29 04:46:48 1999 +0000

    New repository initialized by cvs2svn.
    
    git-svn-id: svn://svn.code.sf.net/p/crossfire/code@1 282e977c-c81d-0410-88c4
-b93c2d0d6712
</code>

===== git svn fetch -r 2 svn ==
Inside this code directory we start to "fetch" revision by revision :
<code bash>
 git svn fetch -r 2 svn;echo $?
	A	trunk/arch/spell/rod_light.111.xpm
	A	trunk/arch/spell/rod_light.arc
	A	trunk/arch/spell/rod_light.112.xpm
	A	trunk/arch/spell/rod_light.113.xpm
	A	trunk/arch/spell/rod_heavy.111

	A	trunk/arch/dev/README
	A	trunk/arch/dev/xpm.template
r2 = e8b6556cff76da629a33f2f20c5e3388df081fca (refs/remotes/git-svn)
Auto packing the repository in background for optimum performance.
See "git help gc" for manual housekeeping.
0
</code>

When you get errors like
>W: Ignoring error from SVN, path probably does not exist: (175002): RA layer request failed: REPORT request >on '/p/crossfire/code/!svn/rvr/2' failed
>W: Do not be alarmed at the above message git-svn is just searching aggressively for old history.
>This may take a while on large repositories
>0hecked through r2
then maybe change the .git/config entry value for the key 'url' from https: to svn: \\
''url = https:%%//%%svn.code.sf.net/p/crossfire/code'' -> ''url = svn:%%//%%svn.code.sf.net/p/crossfire/code'' .


When the fetch has finished, then run git svn log :
<code bash>
git svn log
------------------------------------------------------------------------
r2 | uid200 | 1999-03-29 03:46:48 -0100 (Mon, 29 Mar 1999) | 2 lines

Initial revision

------------------------------------------------------------------------
r1 | (no author) | 1999-03-29 03:46:48 -0100 (Mon, 29 Mar 1999) | 2 lines

New repository initialized by cvs2svn.

------------------------------------------------------------------------
</code>

===== git svn rebase -l ==
The downloaded files are still kept inside the data pack files; \\
to make them show up it needs to rebase locally :
<code bash>
  git svn rebase -l

First, rewinding head to replay your work on top of it...
Fast-forwarded master to refs/remotes/git-svn.
</code>
Now the trunk/arch folder has some files to view .

**Note**: Do not forget the **-l** option for rebase; without that option it would rebase against the HEAD of the svn tree, \\
downloading all the 20000+ revisions !

And ''git log'' tells us :
<code bash>
 git log
commit e8b6556cff76da629a33f2f20c5e3388df081fca (HEAD -> master, git-svn)
Author: uid200 <uid200@282e977c-c81d-0410-88c4-b93c2d0d6712>
Date:   Mon Mar 29 04:46:48 1999 +0000

    Initial revision
    
    
    git-svn-id: svn://svn.code.sf.net/p/crossfire/code@2 282e977c-c81d-0410-88c4-b
93c2d0d6712

commit c03bc89287c20c60c8d52377771046f54166d4eb
Author: (no author) <(no author)@282e977c-c81d-0410-88c4-b93c2d0d6712>
Date:   Mon Mar 29 04:46:48 1999 +0000

    New repository initialized by cvs2svn.
    
    git-svn-id: svn://svn.code.sf.net/p/crossfire/code@1 282e977c-c81d-0410-88c4-b93c2d0d6712
</code>
Crossfire Wiki

User Tools

Site Tools

Page Tools
